Cisco Systems 3.2 Manual De Usuario

The WCS Clients > Detail page lists the reason and status codes that you are likely to encounter when 
reviewing the trap logs. 

 lists client reason codes and descriptions. Table y lists client status 

codes and descriptions.

This table lists client reason codes.

SENSED_TEMPERATURE_LOW

Check room temperature and/or other reasons for 
low temperature.

TEMPERATURE_SENSOR_FAILURE

Replace temperature sensor ASAP.

TEMPERATURE_SENSOR_CLEAR

Temperature sensor is operational.

POE_CONTROLLER_FAILURE

Check ports — possible serious failure detected.

MAX_ROGUE_COUNT_EXCEEDED

The current number of active rogue access points 
has exceeded system threshold.

SWITCH_UP

Controller is responding to SNMP polls.

SWITCH_DOWN

Controller is not responding to SNMP polls, check 
controller and SNMP settings.

RADIUS_SERVERS_FAILED

Check network connectivity between RADIUS 
and the controller.

CONFIG_SAVED

Running configuration has been saved to flash - 
will be active after reboot.

MULTIPLE_USERS

Another user with the same username has logged 
in.

FAN_FAILURE

Monitor Cisco Wireless LAN Controller 
temperature to avoid overheating.

POWER_SUPPLY_CHANGE

Check for power-supply malfunction.

COLD_START

Cisco Wireless LAN Controller may have been 
rebooted.

WARM_START

Cisco Wireless LAN Controller may have been 
rebooted.

0

noReasonCode

Normal operation.

1

unspecifiedReason

Client associated but no longer authorized.