Cisco Systems 3.2 Manual De Usuario
D-5
Cisco Wireless LAN Controller Configuration Guide
OL-8335-02
Appendix D System Messages and Access Point LED Patterns
Using Client Reason and Status Codes in Trap Logs
Client Status Codes
This table lists client status codes.
Client Status Codes
2
previousAuthNotValid
Client associated but not authorized.
3
deauthenticationLeaving
The access point went offline,
deauthenticating the client.
deauthenticating the client.
4
disassociationDueToInactivity
Client session timeout exceeded.
5
disassociationAPBusy
The access point is busy, performing load
balancing, for example.
balancing, for example.
6
class2FrameFromNonAuthStation
Client attempted to transfer data before it
was authenticated.
was authenticated.
7
class2FrameFromNonAssStation
Client attempted to transfer data before it
was associated.
was associated.
8
disassociationStaHasLeft
Operating System moved the client to
another access point using non-aggressive
load balancing.
another access point using non-aggressive
load balancing.
9
staReqAssociationWithoutAuth
Client not authorized yet, still attempting to
associate with an access point.
associate with an access point.
99
missingReasonCode
Client momentarily in an unknown state.
Table D-2
Client Reason Code Descriptions and Meanings (continued)
Client
Reason
Code
Reason
Code
Description
Meaning
Table D-3
Client Status Code Descriptions and Meanings
Client
Status
Code
Status
Code
Description
Meaning
0
idle
Normal operation — no rejections of client
association requests.
association requests.
1
aaaPending
Completing an AAA transaction.
2
authenticated
802.11 authentication completed.
3
associated
802.11 association completed.
4
powersave
Client in powersave mode.
5
disassociated
802.11 disassociation completed.
6
tobedeleted
To be deleted after disassociation.
7
probing
Client not associated or authorized yet.
8
disabled
Automatically disabled by Operating System
for an operator-defined time.
for an operator-defined time.