Cabletron Systems CSMIM-T1 Manual De Usuario

The image –d command display looks like this:

The ipx command sets several parameters associated with IPX booting 
and dumping. This is useful when loading the CSMIM-T1’s operational 
image from a Novell file server. The command syntax is:

ipx [–d]

The ipx command display looks like this:

The 

SELF image name appears only if the self-boot image 

is loaded.

If the image file name contains more than 16 characters, it is 
truncated when MOP is attempted.

monitor:: image -d

Image name: Default (ip): "oper.56.enet"
            Default (mop): "OPER_56_ENET.SYS"    
TFTP Load Directory: "" 
TFTP Dump path/filename: "dump.192.9.200.88"

       

 

SELF image name: "oper.56.enet"

monitor:: ipx
Enter IPX file server name [<uninitialized>]::mars
Enter Frame type, 0=802.3 1=Ethernet II 2=802.2 3=SNAP\

Enter IPX dump user name [<uninitialized>]::susans
Enter IPX dump password [<uninitialized>]::********
Verify IPX dump password []::********
Enter IPX dump path [<uninitialized>]::SYS:\user\susans\

[802.3]::