Avid Technology Car Video System PT Manual De Usuario

9  

Do one of the following:

• To record the entire sequence to tape, select 

the Entire Sequence option.

– or –

• To record the portions of the sequence you 

marked with In and Out points to tape, en-
sure that the Entire Sequence option is de-
selected.

10  

If you are laying back via a FireWire (1394) 

connection (Special > Device > IEEE 1394), select 
the appropriate output mode from the Output 
Mode pop-up menu as follows:

• If all of the media on your Timeline is 

DV25, or if it is all DV50, and all of your ef-
fects are rendered, you can achieve a 
slightly higher quality of output by select-
ing DV25 or DV50 as appropriate.

– or –

• Otherwise, you must select the RT DV25 or 

RT DV50 options to render and transcode 
all of your video to that format.

11  

Select the Video Effect Safe Mode option. 

This will warn you if any effects remain un-ren-
dered.

12  

Select the Stop on Dropped Frames option if 

you want Media Station|PT to automatically 
stop the tape if the audio and video does not 
record correctly.

13  

Select the Add Black At Tail option.

14  

Select one of the following modes from the 

Deck Control section:

Local 

Manually initiates record. This is useful if 

you are recording to a tape which does not al-
ready have time code.

Remote 

Records to a tape that already has time 

code. Media Station|PT will start the VTR and 
drop into record at the specified time code.

15  

Specify the Sequence Time to start recording 

on the tape at the same time as the start of the 
sequence. For example, if the sequence starts at 
1:00:00 in the Timeline, Media Station|PT will 
start recording when the tape reaches 1:00:00.

16  

Specify the Record Deck Time to start record-

ing wherever the VTR is currently parked.

17  

Specify the Mark In Time to start recording at 

the address entered in the top window to the 
right of the transport controls.

18  

Click the yellow Preview button to check 

that all of the tracks you selected are playing and 
that the insert points on the tape are correct.

19  

To record using Local mode, press play on the 

VTR. When ready, click the Record button in the 
Digital Cut window.

– or –

To record using Remote mode, press Record in 
the Digital Cut window. Media Station|PT will 
queue the tape, play, then drop in at the appro-
priate location.

Exporting to XDCAM

You can export NTSC and PAL projects. Depend-
ing on the format (SD or HD), you need to use 
the appropriate XDCAM device (if you export 
SD media, use an XDCAM SD device; if you ex-
port HD media, you must use an XDCAM HD 
device).