Avid Technology Car Video System PT 用户手册
Chapter 3: Basic Media Station|PT Workflows
91
9
Do one of the following:
• To record the entire sequence to tape, select
the Entire Sequence option.
– or –
• To record the portions of the sequence you
marked with In and Out points to tape, en-
sure that the Entire Sequence option is de-
selected.
sure that the Entire Sequence option is de-
selected.
10
If you are laying back via a FireWire (1394)
connection (Special > Device > IEEE 1394), select
the appropriate output mode from the Output
Mode pop-up menu as follows:
the appropriate output mode from the Output
Mode pop-up menu as follows:
• If all of the media on your Timeline is
DV25, or if it is all DV50, and all of your ef-
fects are rendered, you can achieve a
slightly higher quality of output by select-
ing DV25 or DV50 as appropriate.
fects are rendered, you can achieve a
slightly higher quality of output by select-
ing DV25 or DV50 as appropriate.
– or –
• Otherwise, you must select the RT DV25 or
RT DV50 options to render and transcode
all of your video to that format.
all of your video to that format.
11
Select the Video Effect Safe Mode option.
This will warn you if any effects remain un-ren-
dered.
dered.
12
Select the Stop on Dropped Frames option if
you want Media Station|PT to automatically
stop the tape if the audio and video does not
record correctly.
stop the tape if the audio and video does not
record correctly.
13
Select the Add Black At Tail option.
14
Select one of the following modes from the
Deck Control section:
Local
Manually initiates record. This is useful if
you are recording to a tape which does not al-
ready have time code.
ready have time code.
Remote
Records to a tape that already has time
code. Media Station|PT will start the VTR and
drop into record at the specified time code.
drop into record at the specified time code.
15
Specify the Sequence Time to start recording
on the tape at the same time as the start of the
sequence. For example, if the sequence starts at
1:00:00 in the Timeline, Media Station|PT will
start recording when the tape reaches 1:00:00.
sequence. For example, if the sequence starts at
1:00:00 in the Timeline, Media Station|PT will
start recording when the tape reaches 1:00:00.
16
Specify the Record Deck Time to start record-
ing wherever the VTR is currently parked.
17
Specify the Mark In Time to start recording at
the address entered in the top window to the
right of the transport controls.
right of the transport controls.
18
Click the yellow Preview button to check
that all of the tracks you selected are playing and
that the insert points on the tape are correct.
that the insert points on the tape are correct.
19
To record using Local mode, press play on the
VTR. When ready, click the Record button in the
Digital Cut window.
Digital Cut window.
– or –
To record using Remote mode, press Record in
the Digital Cut window. Media Station|PT will
queue the tape, play, then drop in at the appro-
priate location.
the Digital Cut window. Media Station|PT will
queue the tape, play, then drop in at the appro-
priate location.
Exporting to XDCAM
You can export NTSC and PAL projects. Depend-
ing on the format (SD or HD), you need to use
the appropriate XDCAM device (if you export
SD media, use an XDCAM SD device; if you ex-
port HD media, you must use an XDCAM HD
device).
ing on the format (SD or HD), you need to use
the appropriate XDCAM device (if you export
SD media, use an XDCAM SD device; if you ex-
port HD media, you must use an XDCAM HD
device).
Be sure to record at least a few seconds of
black to the tape before performing a digital
cut. This will guarantee that the video tape
is correctly formatted when your digital cut
starts
black to the tape before performing a digital
cut. This will guarantee that the video tape
is correctly formatted when your digital cut
starts