Avaya Bogen APS Custom Guía De Instalación Rápida
2 • 6
To avoid operational problems and verify that the unit was installed corre c t l y, perf o rm the
following checks.
following checks.
•
Check the unit to transmitter data cable connections. Incorrect cable
connections, together with an incorrect signaling format, are the most
common installation errors.
connections, together with an incorrect signaling format, are the most
common installation errors.
•
Verify that the transmitter and pager frequencies match.
•
Ensure that the pagers are at least 10 feet (3 meters) from the transmitter
and antenna.
and antenna.
•
Ensure that the pager batteries are installed and the pagers are turned on.
•
Ensure the POWER LED lights on both the unit and transmitter are lit. If the
LED lights are not lit, verify the power connections.
LED lights are not lit, verify the power connections.
•
Ensure that the TX LED on the transmitter lights for the duration of
transmission. If not, check the data cables.
transmission. If not, check the data cables.
•
Verify that the unit can pick up a ringing line.
•
Verify that the PCI can communicate with the unit
(see section 3.0, Programming the APS Custom).
(see section 3.0, Programming the APS Custom).
•
Verify that the database was sent correctly.
•
Verify that user’s pager CAP codes (Local Pager IDs) were correctly
programmed into the database.
programmed into the database.
•
Verify interface with the PBX - overhead paging, transferring a call, etc.
2.6
Ve r i f y i n g I n s t a l l at i on