Bay Technical Associates 350 Manual De Usuario
Using the Console Interface
893-00992-B
3-55
Logout
The Logout command allows a user working at a password-protected console
terminal or in an active TELNET session to terminate the session.
terminal or in an active TELNET session to terminate the session.
The Logout command works as follows:
•
If the user is accessing the BayStack 350 switch through a TELNET session,
the Logout command terminates the session.
the Logout command terminates the session.
•
If the user is accessing the BayStack 350 switch through a password-protected
console (a terminal connected to the service port of the switch), the Logout
command displays the console-terminal prompt (Figure 3-28). The user must
enter the correct password to access the CI.
console (a terminal connected to the service port of the switch), the Logout
command displays the console-terminal prompt (Figure 3-28). The user must
enter the correct password to access the CI.
Figure 3-28.
Password prompt screen
You can specify whether a password is required for the TELNET session or the
console terminal using the Service Port Configuration screen (see “Service Port
Configuration” on
console terminal using the Service Port Configuration screen (see “Service Port
Configuration” on
If the console terminal is not password protected, the system ignores the Logout
command.
command.
BayStack Model 350T HW:RevC FW:V1.00 SW:V1.00
Password: [ *************** ]
Enter Password:
350fbk.book Page 55 Wednesday, July 9, 1997 4:51 PM