Brocade Communications Systems Brocade ICX 6650 53-1002599-01 Manual De Usuario

Installing the device in a rack or cabinet

2

2-Post rack mount installation

NOTE
Use the following procedure when installing the Brocade ICX 6650 device in a 2-post rack. For 4-post 
racks, follow the procedures in the section 

Remove the rack mount kit from the shipping carton. The kit contains the following:

•

Two L-shaped mounting brackets.

•

Sixteen 8-32 x 5/16 in., panhead Phillips screws with patchlocks.

•

Four 10-32 x 5/8 in., panhead Phillips screws (torque to 25 in-lb, 29 cm-kg). See item 1 in 

.

•

Eight 32-10 retainer nuts (for square-hole rack rails). See item 2 in 

.

•

Eight 32-10 retainer nuts (for round-hole rack rails) See item 3 in 

FIGURE 7

2-post screws and retainer nuts

Use the following steps to mount devices in a 2-post rack.

1. Attach the mounting brackets to the sides of the device as illustrated in 

 using the 

8-32 x 5/16 in. screws. 

FIGURE 8

Attaching the brackets for Brocade ICX 6650 devices