Brocade Communications Systems Brocade ICX 6650 53-1002599-01 Manual De Usuario

Installing the device in a rack or cabinet

2

Remove the rack mount kit from the shipping carton. The kit contains the following:

•

Two L-shaped mounting brackets.

•

Four rack mount rails: two for side attach and two for rear attach racks.

•

Thirty-two 8-32 x 5/16 in., panhead Phillips screws with patchlocks.

•

Eight 10-32 x 5/8 in., panhead Phillips screws (torque to 25 in-lb, 29 cm-kg). See item 1 in 

.

•

Eight 32-10 retainer nuts (for square-hole rack rails). See item 2 in 

•

Eight 32-10 retainer nuts (for round-hole rack rails) See item 3 in 

FIGURE 10

4-post screws and retainer nuts

Use the following steps to mount devices in a 4-post rack. 

CAUTION

Do not use the hardware supplied in a 2-post rack mounting kit to mount a Brocade ICX 6650 
device in a 4-post rack. Mounting the device in a 4-post rack requires additional hardware to 
prevent drooping from possible flexing and distortion of the 4-post rack when a device is not 
properly installed.

1. Attach the mounting brackets to the sides of the device as illustrated in 

 above using 

the 8-32 x 5/16 in. screws. 

2. Attach the appropriate rails: either side attach or rear attach at determined by the type of rack 

in which you are installing the device.

 show exploded views of the optional 4-post rack mount kit.