Siemens AC75 Manual De Usuario
AC75 AT Command Set
13.11 AT+CNMI
s
AC75_ATC_V01.002
Page 379 of 569
10/30/06
Confidential / Released
URC 4
=2 (PDU mode enabled):
+CBM:
Indicates that new cell broadcast message has been received
URC 5
=2 (text mode enabled):
+CBM:
<CR><LF>
Indicates that new cell broadcast message has been received
URC 6
=1 (PDU mode enabled):
+CDS:
Indicates that new SMS status report has been received
URC 7
=1 (text mode enabled):
+CDS:
][,
,
Indicates that new SMS status report has been received
URC 8
,
Indicates that new SMS status report has been received
Parameter Description
[0]
(&F)
Buffer unsolicited result codes in the TA. If TA result code buffer is full, indica-
tions can be buffered in some other place or the oldest indications may be dis-
carded and replaced with the new received indications.
1
Discard indication and reject new received message unsolicited result codes
when TA-TE link is reserved (e.g. in on-line data mode). Otherwise forward
them directly to the TE.
2
Buffer unsolicited result codes in the TA when TA-TE link is reserved (e.g. in
online data mode) and flush them to the TE after reservation. Otherwise for-
ward them directly to the TE.
3
Forward unsolicited result codes directly to the TE. When TA-TE link is
reserved (e.g. in online data mode) the URCs are signaled according to the
parameters
,
and
Rules for storing received short messages depend on the relevant data coding method (refer to GSM 03.38),
preferred memory storage (
) setting and this value.
Note: If AT command interface is acting as the only display device, the ME must support storage of class 0 mes-
sages and messages in the message waiting indication group (discard message)
[0]
[0]
(&F)
No SMS-DELIVER indications are routed to the TE.
1
If SMS-DELIVER is stored in ME/TA, indication of the memory location is
routed to the TE using unsolicited result code:
<mode>
(num)(&W)
<mt>
(num)(&W)(&V)