Siemens AC75 Manual De Usuario

s

AC75_ATC_V01.002

Page 380 of 569

10/30/06

Confidential / Released

2

SMS-DELIVERs, except class 2 messages and messages in the message

waiting indication group (store message) are routed directly to the TE using

unsolicited result code:

3

Class 3 SMS-DELIVERs are routed directly to the TE using unsolicited result

codes defined in 

=2. Messages of other data coding schemes result in

indication as defined in 

=1.

Rules for storing received CBMs depend on the relevant data coding method (refer to GSM 03.38), the setting

of Select CBM Types (

) and this value: 

[0]

(&F)

No CBM indications are routed to the TE.

2

New CBMs are routed directly to the TE using unsolicited result code: 

3

Class 3 CBMs are routed directly to TE using unsolicited result codes defined

in 

[0]

(&F)

No SMS-STATUS-REPORTs are routed to the TE.

1

SMS-STATUS-REPORTs are routed to the TE using unsolicited result code: 

2

If SMS-STATUS-REPORT is routed into ME/TA, indication of the memory

location is routed to the TE using unsolicited result code: 

[1]

(&F)

TA buffer of unsolicited result codes defined within this command is cleared

 changes from 0 to 1...3. 

Integer type; value in the range of location numbers supported by the associated memory 

• Parameters 

=2,3 and 

=1 are only available with GSM phase 2+ (see 

=1). Incoming SMs

or Status Reports have to be acknowledged with 

=0 when using these phase 2+ parameters. 

• Requirements specific to Multiplex mode:

=0) only one channel can use a phase 2+ parameter. The parameter for 

and 

 on the other channels have to be set to zero. If either a SM or a Status Report is not acknowledged,

 parameter in all channels will be set to zero. 

• If the ME operates on different instances (MUX channels 1, 2, 3 or ASC0/ASC1) avoid different settings for

routing and indicating short messages. For example, if messages shall be routed directly to one instance of

the TE (set with 

, 

), it is not possible to activate the presentation of URCs with 

or 

 on another instance. Any attempt to activate settings that conflict with existing settings on

another interface, will result in CME ERROR, or accordingly CMS ERROR. 

• Handling of Class 0 short messages: 

If the host application is provided with a display and 

=1 has been set Class 0 short messages can

be displayed immediately.

If the host application does not include a display, ME handles Class 0 short messages as though there was

no message class, i.e. it will ignore bits 0 and 1 in the 

 and normal rules for exceeded memory capacity

shall apply. This approach is compliant with  GSM 03.38 . 

• The parameters 

 and 

 will only be displayed if 

 of the 

 command is set to 1. 

• If either a SM or a Status Report is not acknowledged, all 

 parameter in all channels will be set to

zero. 

<bm>

(num)(&W)(&V)

<ds>

(num)(&W)(&V)

<bfr>

(num)(&V)

<index>

(num)