Frye WinCHAP ver. 2.82 Manual De Usuario
48
Audiometric Test Screen
WinCHAP User’s Manual
2. Enter the Test Menu window by clicking Test Menu from the Main window.
3. Search for your client record. See Section 4.1.3.
4. Select your client’s name in the right column of the Test Menu. This will
3. Search for your client record. See Section 4.1.3.
4. Select your client’s name in the right column of the Test Menu. This will
open the Client Tests window.
5. Select Audiometric Test. This will open the Audiometric Test window
and start a new test.
5.1.2 Opening an existing test
To open a previously saved Audiometric Test:
1. Enter the Test Menu by clicking Test Menu from the Main window.
2. Search for your client record. See Section 4.1.3.
3. Click the PLUS (+) to the left of the client’s name in the right column of
2. Search for your client record. See Section 4.1.3.
3. Click the PLUS (+) to the left of the client’s name in the right column of
the Test Menu. This will display any audiometric tests saved to that client
record. If there is no PLUS (+) next to the client’s name, no audiometric
tests have been saved for that client.
record. If there is no PLUS (+) next to the client’s name, no audiometric
tests have been saved for that client.
4. Open the desired test by clicking on it.
5.1.3 Checking your connection
Before you can get any measurement curves from your FONIX audiometer, your
computer must be connected to your audiometer. See Section 1.3.
computer must be connected to your audiometer. See Section 1.3.
Click the
Check button located in the toolbar to confirm your audiometer’s
connection. You can also open the Tools menu and select Check Audiometer
Connection. This will establish whether or not a successful connection had
been made from the computer to the audiometer. If successful, the Talk
Forward button will appear in the Audiometric Curves window.
Connection. This will establish whether or not a successful connection had
been made from the computer to the audiometer. If successful, the Talk
Forward button will appear in the Audiometric Curves window.
To change the COM port used for the audiometer connection:
1. Open the Tools menu from the Audiometric Test window and select
FONIX Communication Setup. This will open the Communications Setup
window.
window.
2. Select the COM port used by your FONIX audiometer in the appropriate
drop-down list.
3. Click the Check Audiometer button to verify your connection.
4. Click Save Settings.
5. Click Back to exit the window.
4. Click Save Settings.
5. Click Back to exit the window.
5.1.4 Setting details about the test
The Client & Test Info window displays the name and birth date of the client
and the date and time of the audiometric test. If desired, you can specify the
operator of the audiometric test and the audiometer that was used by clicking
and the date and time of the audiometric test. If desired, you can specify the
operator of the audiometric test and the audiometer that was used by clicking