Frye WinCHAP ver. 2.82 Manual De Usuario
Chapter 5
47
Audiometric Test
The Audiometric Test window stores all of the client’s audiometric information.
It also provides a remote, computer-based interface to a connected FONIX audi-
ometer. The information available in the Audiometric Test window has been
organized into six different sub-windows, each of which is accessible by click-
ing on the appropriate icon on the left side of the main window. They are:
It also provides a remote, computer-based interface to a connected FONIX audi-
ometer. The information available in the Audiometric Test window has been
organized into six different sub-windows, each of which is accessible by click-
ing on the appropriate icon on the left side of the main window. They are:
• Audiometric Curves: Graphical display for air, bone, aided & unaided,
and other miscellaneous audiometric measurements. Also contains inter-
face for remote operation and data collection from a FONIX audiometer.
face for remote operation and data collection from a FONIX audiometer.
• Curve Data Values: Numeric display of the air and bone data graphically
displayed in the Audiometric Curves sub-window.
• Speech Audiometry: Place to store speech audiometry and speech dis-
crimination measurements.
• Sound Field Audiometry: Numeric display of the aided & unaided data
graphically displayed in the Audiometry Curves sub-window.
• Impedance: Place to store impedance measurements. Note: FONIX audi-
ometers are not capable of these measurements.
• Client & Test Info: Display of basic information about the client and test
such as name, birthday, date & time of the test. Also shows any hearing
aids attached to the client. Hearing aid tests can be created from this win-
dow by highlighting a listed hearing aid and clicking the Test Hearing Aid
button.
aids attached to the client. Hearing aid tests can be created from this win-
dow by highlighting a listed hearing aid and clicking the Test Hearing Aid
button.
Each of these sub-windows share a toolbar and menus.
To open the Audiometric Test window, follow the instructions found in Section
4.1.3.1 and choose to open Audiometric Test in Step 4.
4.1.3.1 and choose to open Audiometric Test in Step 4.
See Section 5.5 for information on sending an insertion gain target to your ana-
lyzer and opening a hearing aid test window.
lyzer and opening a hearing aid test window.
5.1 Introduction
This section describes how to start an audiometric test, open a saved test, check
your audiometer’s connection, and other basic features.
your audiometer’s connection, and other basic features.
5.1.1 Starting a new test
All Audiometric Tests are tied to a client record. To create a new test:
1. Create a client file for your client, if you haven’t already done so. See
Section 3.2.1.1 or 3.3.1.1.