HP (Hewlett-Packard) 760c Manual De Usuario

Clean the air filters and air intake vents after every 100 hours of use. If 
they are not cleaned periodically, they can become clogged with dust, 
preventing proper ventilation. This can cause overheating and damage 
the projector. 

Follow these steps:

1. Turn off the projector. Wait for the 

Power

 light to stop flashing, 

then unplug the power cord.

2. Turn the projector upside down.

3. To clean the intake vents, use a small vacuum cleaner designed for 

computers and other office equipment. If you don’t have one, 
gently clean the vents with a soft brush (such as an artist’s 
paintbrush).

4. If the dirt is difficult to remove or the filter is broken, replace the 

filter as described on page 64. Contact your dealer or call Epson at 
800-GO-EPSON (800-873-7766) to obtain a new filter. 

To order replacement air 
filters, request part number 
V13H134A08. See page 11 
for ordering information.

Montreal User's Guide.book  Page 61  Tuesday, April 19, 2005  11:27 AM