Mitsumi electronic MR-J3- A Manual De Usuario
16 - 7
16. PARAMETER UNIT (MR-PRU03)
16.5 Display
Connect the MR-PRU03 parameter unit to the servo amplifier (drive unit), and turn ON the power of the servo
amplifier (drive unit). In this section, the screen transition of the MR-PRU03 parameter unit is explained,
together with the operation procedure in each mode.
16.5.1 Outline of screen transition
amplifier (drive unit). In this section, the screen transition of the MR-PRU03 parameter unit is explained,
together with the operation procedure in each mode.
16.5.1 Outline of screen transition
Alarm/
Diagnosis mode
ESC
DATA
PARAM
PARAM
ALM/
DGN
Normal transition
(i.e. no communication
error is detected)
(i.e. no communication
error is detected)
Monitor mode
Parameter
mode
Initializing
Servo amplifier (drive unit) power ON
(Note)
MON
TEST
Test operation
mode
MR-PRU03
parameter unit setting
Note. If initialization communication fails, a communication error is displayed. Press the "ESC" key to return to
the PRU setting screen.