Mitsumi electronic MR-J3- A Manual De Usuario
16 - 9
16. PARAMETER UNIT (MR-PRU03)
16.5.3 Monitor mode (status display)
(1) Monitor display
The servo status during operation is shown on the display. Refer to (2) in this section for details.
24. For manufacturer setting
1. Cumulative feedback pulse
2. Servo motor speed
3. Droop pulse
4. Cumulative command pulse
5. Command pulse frequency
6. Analog speed command voltage
Analog speed limit voltage
Analog speed limit voltage
10. Peak load ratio
11. Instantaneous torque
12. Within one-revolution position
13. ABS counter
14. Load inertia moment ratio
15. Bus voltage
8. Regenerative load ratio
9. Effective load ratio
7. Analog torque command voltage
Analog torque limit voltage
Analog torque limit voltage
16. For manufacturer setting
17. For manufacturer setting
18. For manufacturer setting
19. For manufacturer setting
20. For manufacturer setting
21. For manufacturer setting
22. For manufacturer setting
23. For manufacturer setting
MON