Bakers Pride NMK Manual De Usuario

10 

 

 
Please read the operating instructions thoroughly and ensure all packaging has 
been removed before switching mains power “ON”. 
 
IMPORTANT: 
 
Ensure that who-ever is operating this appliance is fully conversant with its work-
ing and is made aware of the dangers of incorrect operation. 
 
If the operating manual is not available with the appliance, please contact  the 
Technical Services Department at BKI (See page 6) 

 

For added safety `NMK` rotary ovens have a built in thermal cut-out to protect 
against overheating through component failure or incorrect use. 

If for any reason the thermal cut-out operates the oven will automatically shut 
down and should be switched `OFF`, disconnected from the mains and allowed to 
cool. 

The oven must not be re-used until it has been checked by a qualified electrician 
or BKI appointed service agent. 

 

 

 

7 

 

• 

Single phase appliances fitted with a power supply cable having a rated 
input Not exceeding 3kW may be connected to a suitable power supply by 
means of a BS 1363 ASTA approved 13 amp plug fitted with a BS 1362 
fuse. 

 
• 

Do not use an adaptor or extension lead, plug directly into a 13 amp socket 
outlet. 

 
• 

Check the appliance data rating plate and test certificate for appliance fuse 
rating. 

 
• 

Where a 13 amp plug is required, please follow the instructions below: 

 

The wires in the mains lead are coloured in accordance with the following code: 
 
   GREEN 

& 

YELLOW  EARTH 

 
   BLUE 

    NEUTRAL 

 
   BROWN 

   LIVE 

 
As the conductors in the equipment mains lead may not correspond with the  
coloured markings of the terminals in your plug, proceed as follows: 
 
The wire that is coloured green & yellow must be connected to the terminal in the 
plug that is marked with the letter E or by the Earth symbol         or  coloured 
green or green & yellow. 
 
The wire that is coloured blue must be connected to the terminal that is marked 
with the letter N or coloured black. 
 
The wire that is coloured brown must be connected to the terminal that is marked 
with the letter L or coloured red.