Cognitive Solutions A776 Manual De Usuario
Chapter 5: Programming commands 113
A776-PG00001 C 12/09
A776 (B780) Programming Guide
Formulas
The distance from the current position is set to (nL + nH × 256) × vertical or horizontal motion unit] inches. The amount
of movement is calculated only for the paper roll.
of movement is calculated only for the paper roll.
When pitch n is specified to the movement downward:
nL + nH × 256 = n
nL + nH × 256 = n
When pitch n is specified to the movement upward (the negative direction), use the complement of 65536.
When pitch n is specified to the movement upward:
nL + nH × 256 – 65536 – N
nL + nH × 256 – 65536 – N
Exceptions
This command is used only in page mode, otherwise it is ignored.
Any setting that exceeds the specified printing area is ignored.
Macros
These commands are used to select and perform a user-defined sequence of printer operations.
Select or cancel macro definition
ASCII
GS :
Hexadecimal 1D 3A
Decimal
29 58
Starts or ends macro definition. Macro definition begins when this command is received during normal operation and
ends when this command is received during macro definition. The macro definition is cleared, during definition of the
macro when the execute macro (1D 5E) command is received.
ends when this command is received during macro definition. The macro definition is cleared, during definition of the
macro when the execute macro (1D 5E) command is received.
Normal printing occurs while the macro is defined. When the power is turned on the macro is not defined.
The defined contents of the macro are not cleared by the initialize printer (1B 40), thus, the initialize printer
(1B 40) command may be used as part of the macro definition.
(1B 40) command may be used as part of the macro definition.
If the printer receives a second select or cancel macro definition (1D 3A) command immediately after previously
receiving a select or cancel macro definition (1D 3A) the printer remains in the macro undefined state.
receiving a select or cancel macro definition (1D 3A) the printer remains in the macro undefined state.
Formulas
The contents of the macro can be defined up to 2048 bytes.
Exceptions
If the macro definition exceeds 2048 bytes, excess data is not stored.
Execute macro
ASCII
GS ^ r t m
Hexadecimal 1D 5E r t m
Decimal
29 94 r t m
Value of r:
The number of times to execute the macro.
Value of t:
The waiting time for executing the macro.
Executes a macro. After waiting for a specified period the printer waits for the paper feed button to be pressed. After
the button is pressed, the printer executes the macro once. The printer repeats this operation the number of specified
times.
the button is pressed, the printer executes the macro once. The printer repeats this operation the number of specified
times.
When the macro is executed by pressing the paper feed button (m = 1), paper cannot be fed by using the paper feed
button.
button.
Continued . . .