Cognitive Solutions A776 Manual De Usuario

A776-PG00001 C 12/09 

A776 (B780) Programming Guide

ASCII: 

DC1 

Hexadecimal:  11 

Decimal: 

17

Closes the feed roller and platen (forms compensation arm assembly). If the printer is reset or the Clear (0x10) is 
received, the feed roller and platen are opened.

This command executes if the platen is already closed. This command is processed regardless of which station is 
selected.

ASCII: 

CAN 

Hexadecimal  18 

24

Opens the feed roller and platen (forms compensation arm assembly) so that a form may be inserted (default position).

This command has the same code as the Cancel print data in page mode command, which is only executed in page 
mode.

This command executes if the platen is already open. This command is processed regardless of which station is 
selected.

SUB 

ESC m 

Hexadecimal  1A 

1B 6D 

Decimal 

26 

27 109

Partially cuts the receipt, leaving 5 mm (0.20”) of paper. This command is implemented the same as Full knife cut (19 
and 1B 69).

There are two codes (Hex 1A or 1B 6D) for this command and both codes perform the same function.

Line feed is executed first if print buffer is not empty.

This command is processed regardless of which station is selected.

ESC BEL 

Hexadecimal  1B 07 

Decimal 

27 7

Generates an audible tone. Performed by the printer to signal certain conditions.

ESC < 

Hexadecimal  1B 3C 

27 60

Moves the impact printhead (unless already there) to the home position.

The printer is able to detect carriage motor jams, eliminating the need to home the printhead after each slip 
transaction.