Cognitive Solutions A776 Manual De Usuario

A776 (B780) Programming Guide 

A776-PG00001 C 12/09

ESC c 4 n 

Hexadecimal  1B 63 34 n 

Decimal 

27 99 52 n

Value of n: 

Sensor status

Default: 

0

0,1 

Stop receipt on receipt low

 4 

Stop slip if trailing edge uncovered

5 

Stop slip if leading edge uncover 

 

7 

Stop validation print if trailing edge uncovered  

 

(B780 only)

Determines which sensor stops printing on the respective station. The command does not affect the paper out status 
on the receipt station, which will automatically stop the printer when the paper is depleted.

ESC c 5 n 

Hexadecimal  1B 63 35 n 

Decimal 

27 99 53 n

Value of n: 

0 = Enable 

 

1 = Disable

0 (Enable)

Enables or disables the paper feed button. If the last bit  
is 0, the paper feed button is enabled. If the last bit is 1, the paper feed button is disabled.

Functions that require the paper feed button (except for the execute macro [1D 5E r t m] command) cannot be used 
when it has been disabled with this command.

ASCII 

ESC f m n 

Hexadecimal  1B 66 m n 

Decimal 

27 102 m n

Value of m: 

Not used 

Value of n: 

Tenths of seconds

The time that the printer waits for a slip to be inserted is set using the configuration menu. The default is forever, but it 
can be set to 1, 3, or 5 minutes. 

The value “n” sets the time (n x 0.1 seconds) that the printer waits to close the platen and start printing after the slip has 
been inserted. The printer reads that a slip is inserted when the leading edge and trailing edge sensors are covered. 
The slip-in light is lit (green) when both sensors are covered.

If a slip is not inserted in the time specified, the receipt station is selected for the next function.