Cognitive Solutions A776 Manual De Usuario
Chapter 5: Programming commands
55
A776-PG00001 C 12/09
A776 (B780) Programming Guide
Select print mode
ASCII
ESC ! n
Hexadecimal 1B 21 n
Decimal
27 33 n
Value of n:
Pitch selection (standard, compressed, double-high, or double-wide.)
Value of n
Bit
Bit
Function
0
1
Bit 0
Pitch
Standard
1
Compressed
(See chart below)
pitch
pitch
Bit 3
Emphasized mode Canceled
Set
Bit 4
Double-high
Canceled
Set
Bit 5
Double-wide
Canceled
Set
Bit 7
Underlined mode Canceled
Set
Bits 1, 2 and 6 are not used.
1
Standard and compressed pitch cannot be used together in the same line.
Slip Default is standard pitch on A776 and compressed pitch on B780.
Selects the print mode: standard, compressed, double-high, or double-wide.
Default:
00
Pitch
Receipt Receipt
Slip
Slip
Station
CPI
Station
CPI
Standard
44
15.6
42
13.9
Compressed 56
20.3
51
17.1
Related information
Double-high can be enabled or disabled for the slip. Default is disabled for the slip on A776, and enabled on B780.
The bits in this command perform the same function as the stand-alone functions:
1B 16 n
Select pitch
1B 45 n
Emphasized
1B 47 n
Double-strike
12
Double-wide
13
Single-wide
1B 2D n
Underline
Select or cancel user-defined character set
ASCII
ESC % n
Hexadecimal 1B 25 n
Decimal
27 37 n
Value of n:
0 = Code Page 437
1 = User Defined (RAM)
2 = Code Page 850
Range of n:
0–2
Default:
0 (Code Page 437)
Selects the character set. When an undefined RAM character is selected, the code page 437 character is used. Look in
Appendix B for the character sets.
Appendix B for the character sets.
Exception:
The character sets cannot be used together on the same line.