Cabletron Systems 3Com Manual De Usuario

To install an AP, you will have to connect the AP to your network, mount the AP in 
a location best suited for reception, and provide power to the AP.

Before installing the AP, review the following guidelines and precautions.

■

Ensure that you have performed the preinstallation procedure outlined in the 
Access Point Quick Start Guide.

■

Do not install the AP in wet or dusty areas without additional protection. 
Contact a 3Com representative for more information.

■

Verify the environment has a temperature range between
-20˚ C to 55˚ C.

■

If you attach the AP to a wired Ethernet, make sure that the AP is on the 
same subnet.

The AP package contains the following items.

■

1 access point (Check the AP model number on the bottom of the unit against 
the model listed on the packaging.)

■

1 power adapter

■

1 mounting bracket and hardware

■

1 PowerBASE-T module

■

1 null-modem serial cable

■

2 power cords

Contact 3Com Customer Support (see Appendix B) to report missing or improperly 
functioning items.

The minimum installation requirements for a single-cell, peer-to-peer network 
is a power outlet. The AP supports a 10BASE-T unshielded twisted pair (UTP) 
Ethernet cable.