Teledyne MX300-I Manuel D’Utilisation
Portable Oxygen Monitor
Operation
Teledyne
Analytical
Instruments
17
Figure 2-2: Sensor Cable Connection to Monitor
Note: When the MX300-I instrument is used for diffusion
sampling (i.e., incubators, tents, etc.), the plastic flow
diverter must be removed from the R17MED sensor. If the
sensor is used in breathing circuits, etc, the diverter must
be used as shown in Figure 2-3.
diverter must be removed from the R17MED sensor. If the
sensor is used in breathing circuits, etc, the diverter must
be used as shown in Figure 2-3.
Figure 2-3: Mounting the Sensor in the Tee Adapter