Crown Audio I-T5000 HD Manuel D’Utilisation

4.8.18 Signal Generator
Both channels share a noise generator that allows 
noise to be mixed into the audio signal. This is useful 
for noise masking applications and testing. Each 
channel has the following controls:
•   Noise On/Off: Turns the noise generator on or off.
•   Noise Type: Selects full-spectrum white noise or 
pink noise.
•   Noise Level: Sets the noise level with a fader.

The sine-wave signal generator lets you mix a 
single tone into the audio signal. Its controls are listed 
below:
•   Sine On/Off: Turns the sine-wave generator on or 
off.
•   Sine Frequency: Sets the frequency anywhere 
from 20Hz to 20kHz.
•   Sine Level: Sets the level of each channel’s sine-
wave signal independently.

The noise generator and sine-wave generator cannot be 
used at the same time.