ARRI 416 Manuel D’Utilisation

All ARRIFLEX lenses with a PL-mount can be used. Lenses 

with a Ø 41 mm standard or bayonet mount can be used 

with a suitable adapter. Heavy and long lenses, such as 

zoom lenses, must be supported at all times.

•  Remove the protective cap from the lens mount receptacle 

by turning the lens lock ring 

a

 counter-clockwise 

(as viewed from in front of the camera) as far as it will 

go and then pulling out the protective cap.

•  Push the lens into the lens mount receptacle without 

catching it at the edges. One of the four slots on the 

lens mount must fit over the index pin 

a

.

•  Press the lens flat onto the lens mount receptacle and 

turn the lens lock ring clockwise to tighten.

Note: 

The camera is permanently set in Super 16 

configuration.

index pin

lens ring