ARRI 416 Manuel D’Utilisation

The ARRIFLEX 416 offers the possibility to set and store 

two frame rates. It is possible to select and store:

•  a standard frame rate (23.976, 24, 25, 29.97 and 30 fps)

•  and a freely programmed frame rate between 1 and 

75 fps in increments of 0.001 fps.

The frame rate is activated via the “NORM“ and “PS/CCU” 

buttons 

a

 on the left of the camera. The “NORM” 

setting corresponds to the standard frame rate, the “PS/CCU” 

position to the freely programmed frame rate.

Standby Operation

•  The camera must be in Mode 1 and the camera must 

be set to “NORM”.

•  Press the “SEL” button repeatedly until the desired 

frame rate is selected. Within 3 seconds, confirm this 

choice by pressing the “SET” button, otherwise the 

initial setting is retained.

Note: 

If the total exposed film counter is displayed in 

Mode 1, pressing “SEL“ first steps through the 

digits of the total exposed film counter before 

the choice of frame rate is offered.

RUN button

black bar to indicate Mode 1

PHASE button

MODE button

SEL / SET buttons

NORM button

PS/CCU button

LOCK button