ARRI 416 Manuel D’Utilisation

•  Press the “MODE“ button until the display shows Mode 4. 

The display shows the current timecode value. 

The top line shows “Hours:Minutes“. The bottom line 

shows “Seconds:TC generator frame rate“.

Note: 

The timecode generator frame rate matches the 

camera‘s frame rate.

Timecode recording is only possible at the Standard 

Speeds of 23.976, 24.00, 25.00, 29.97 & 30.00 fps.

•  Press the “MODE“ button until the display shows Mode 4.

•  Press and hold the “SET” button until the “TC“ symbol 

appears (ON) or disappears (OFF).

Note: 

For timecode recording a Timecode Module 

must be fitted to the magazines.

Note: 

Timecode recording is also turned on when the 

camera receives a valid timecode signal into 

the “TCC“ connector.