ARRI 416 Manuel D’Utilisation

User Bits are automatically input with the timecode signal 

but they may also be set manually in Mode 5.

•  Press the “MODE“ button until the display shows Mode 5.

•  Use the “SEL” button to select the digit you wish to change. 

The selected digit will flash.

•  The “SET” button changes the value of the flashing digit.

•  Repeat the last two steps for all the digits that need to 

be changed.

Note: 

User Bits are hexadecimal so only values 

between 0 - 9 and A - F are available.

•  Change from Mode 1 to Mode 4 by pressing the 

“MODE” button five times.

•  Press the “SEL” button three times to activate the 

display for setting the button illumination.

•  Select the desired brightness using the “SET” button. 

0…off 

3…maximum brightness