Fujifilm F710 Manuel D’Utilisation

49

48

Set the Power switch to “

q

”.

1 Hold down the “

f

” Continuous shooting button.

2 Turn the Command dial to select the Continuous

shooting mode.
Release the “

f

” button to confirm your selection.

Setting the Continuous shooting mode (except for
“OFF”), the selected mode appears on the LCD
monitor.

f

: Top 5-frame continuous shooting

j

: Auto bracketing

k

: Final 5-frame continuous shooting

h

: Long-period continuous shooting

◆

◆

h Shooting continues as long as you hold down the Shutter button. In Auto bracketing mode however,

just press the Shutter button once to shoot 3 frames.

h If there is insufficient space on the xD-Picture Card, as many frames are shot as can be recorded on

the available space. When auto bracketing, if there is insufficient space on the xD-Picture Card to
record 3 frames, no pictures are taken.

h The focus is determined in the first frame and cannot be changed in mid-sequence.
h The exposure is determined in the first frame, but in Long-period continuous shooting the exposure is

adjusted for the scene being shot.

h The speed of continuous shooting varies depending on the shutter speed.
h The speed of continuous shooting does not change with the quality setting.
h The flash cannot be used as the flash mode is set to Suppressed flash.
h For Continuous shooting, final 5-frame continuous shooting and pictures taken using auto bracketing,

the results are always displayed after you shoot. To choose whether or not to record the images, set
“IMAGE DISP.” in SET-UP to “PREVIEW” (

➡P.86). Note that pictures taken using Long-period

continuous shooting are recorded without displaying the results.

f CONTINUOUS SHOOTING

 ２５０

 ２５０ Ｆ５．６

Ｆ５．６

Ｐ

   １９

   １９

 ２５０

 ２５０ Ｆ５．６

Ｆ５．６

Ｐ

ＯＦＦ

ＯＦＦ

   １９

   １９

0

1

0

2

Use this function for shots to get the correct brightness (exposure), such as shots with extremely
high contrast between the subject and the background.

D EXPOSURE COMPENSATION

Ｐ

 ２５０

 ２５０ Ｆ５．６

Ｆ５．６

   １９

   １９

Set the Power switch to “

q

”.

Set the Mode dial to “

N

”, “

M

” or “

<

” mode.

1 Hold down “

D

” Exposure compensation button.

2 Turn the Command dial to set the compensation

value.

The symbol indicating the compensation direction
(“–” or “+”) turns yellow. The “

D

” icon also turns

yellow while exposure compensation is being set
and then turns blue after setting is completed.

h Compensation range

–2 EV to +2 EV (13 steps in 1/3 EV increments)

●

Exposure compensation cannot be used in the “

B

”, “

m

”,

“

,

”, “

.

”, “

/

”, “

>

” and “

r

” modes.

●

Exposure compensation is disabled in the following
situations:
When “

d

” (Forced flash) or “

b

” (Red-eye reduction) mode is

used and the scene is dark.

0

1

0

2

This setting is retained when the mode is changed
or the camera is turned off ( “

D

” icon appears). Set

the exposure compensation to “0” unless
compensation is required.

◆

◆

Adjust the exposure compensation according to the level of brightness or darkness in the image.

h When the subject appears too bright

Try a negative (–) compensation setting.
This will make the overall image darker.

h When the subject appears too dark

Try a positive (+) compensation setting.
This will make the overall image brighter.

■ Guide to compensation

i Backlit portraits: +2 steps to +4 steps (+

DW

EV to +1

DQ

EV)

i Very bright scenes (such as snowfields) and highly reflective subjects: +3 steps (+1 EV)
i Shots made up predominantly of sky: +3 steps (+1 EV)
i Spotlit subjects, particularly against dark backgrounds: –2 steps (–

DW

EV)

i Scenes with low reflectivity, such as shots of pine trees or dark foliage: –2 steps (–

DW

EV)