Fujifilm F710 Manuel D’Utilisation
53
Advanced
Features
3
52
ＱＵＡＬＩＴＹ
ＱＵＡＬＩＴＹ
１９
１９ ＦＲＡＭＥＳ
ＦＲＡＭＥＳ
３３
３３
１０
１０
Ｎ
２５
２５
1
1 Set the Power switch to “
q
”.
2 Set the Mode dial to Still photography mode.
3 Press the Photo mode (
3 Press the Photo mode (
p
) button.
1 Press “d” or “c” to select the “
y
” QUALITY
mode and then press “a” or “b” to change the
setting.
setting.
2 Press the “MENU/OK” button to confirm the
setting.
●
!
The numbers to the right of each setting show the number of
available frames.
available frames.
●
!
When changing the quality mode, the number of available
frames also changes (
frames also changes (
➡P.25).
0
1
0
3
0
2
2
0
1
0
2
y QUALITY MODE (NUMBER OF RECORDED PIXELS)
p PHOTO MODE STILL PHOTOGRAPHY
The quality setting is retained even when the
camera is turned off or the Mode dial is changed.
camera is turned off or the Mode dial is changed.
Quality settings in Still photography mode
Quality mode
Printing at A4 size or printing part of the image cropped at A5 or A6 size.
5
N (2832
× 2128)
¢
N (2816
× 1584)
Printing at A4 size or printing part of the image cropped at A5 or A6 size.
For better image quality, select “
For better image quality, select “
5
F” or “
¢
F”.
5
F (2832
× 2128)
¢
F (2816
× 1584)
Printing at A4 or A5 size or printing part of the image cropped at A6 size.
3
(2048
× 1536)
£
(2304
× 1296)
Printing at A5 or A6 size.
2
(1600
× 1200)
™
(2048
× 1152)
Printing at A6 size.
1
(1280
× 960)
¡
(1536
× 864)
Sample Uses
◆
Quality setting in high-sensitivity mode
◆
If selecting a quality setting other than “
1
,
¡
” when the camera is set to high-sensitivity mode, “
&
”
appears blinking and the quality cannot be changed.
✽ For full-screen playback on a wide-screen or high-definition TV or to print at HV (Hi Vision) size, select a quality
setting for wide-angle shooting.
While the “C-AF” button is pressed, the camera continues to focus on the main subject in the AF
frame. Use this button to take pictures of a moving subject.
frame. Use this button to take pictures of a moving subject.
CONTINUOUS AF
STILL PHOTOGRAPHY FUNCTIONS
Available Photography mode:
Set the Power switch to “
q
”.
Set the Mode dial to “
B
”, “
m
”, “
,
”, “
.
”, “
/
”,
“
N
”, “
M
”, “
<
”, or “
>
”, mode.
Frame the shot so that the subject fills the center of
the image or the entire AF frame.
the image or the entire AF frame.
Press the “C-AF” button.
While the “C-AF” button is held down, the camera
continuously focuses on the main subject inside the
AF frame.
While the “C-AF” button is held down, the camera
continuously focuses on the main subject inside the
AF frame.
Press the shutter button down halfway (AF/AE lock)
without releasing the button, press the button down
fully to take the picture.
This allows you to shorten the focusing time.
without releasing the button, press the button down
fully to take the picture.
This allows you to shorten the focusing time.
●
!
Continuous AF cannot be used in the AF AREA or MF
(Manual Focus) modes.
See P.61 for information on changing focus mode.
(Manual Focus) modes.
See P.61 for information on changing focus mode.
●
!
Using the WIDE/STD switch while the “C-AF” button is
pressed cancels Continuous AF mode.
pressed cancels Continuous AF mode.
1
2
3
4
5
AUTO
AUTO
１９
１９
AUTO
AUTO
１９
１９
Because you cannot check the focusing using the
viewfinder, continuous AF is only available when
the LCD monitor is used.
viewfinder, continuous AF is only available when
the LCD monitor is used.
●
!
See P.20 for information on change the setting to WIDE/STD.
●
!
See P.79 for information on printing images shot as WIDE images.