Hunter Fan 42605-01 Manuel D’Utilisation

Hunter Fan Company 

42605-01 • 02/16/06

42605-01 • 02/16/06 

Hunter Fan Company

Your Hunter fan comes with a switch housing assembly and an 
optional light fixture. is feature gives you the option of installing the 
fan with OR without the included light fixture. e steps below direct 
you whether or not you are installing a light fixture. 

 WARNING:  Use only the light fixture supplied with this fan model.

7-1.  To attach the upper switch housing, partially install two housing 

assembly screws into the switch housing mounting plate.

7-2.  Feed the upper plug connector through the center opening of the 

housing. 

7-3.  Align the keyhole slots in the housing with the housing assembly 

screws. 

7-4.  Turn the housing counterclockwise until the housing assembly 

screws are firmly situated in the narrow end of the keyhole slots. 
Install the remaining housing assembly screw into the housing. 
Tighten all three screws firmly.

     

 CAUTION:  Make sure the upper switch housing is securely 

attached to the switch housing mounting plate. Failure to properly 
attach and tighten all three assembly screws could result in the 
switch housing and light fixture falling.

7-5.  If you want to install the light fixture, proceed with step 7-6 

now.

    If you do not want to install the light fixture, you need to 

uninstall it now. See “Uninstalling the Light Fixture” on page 12. 
Once you have uninstalled the light fixture, continue with step 
7-6.

Housing 

Assembly 

Screw

Upper 

Switch 

Housing