Winix WAC-9000 Manuel D’Utilisation
AIR CLEANER SET-UP
NOTE: Follow these instructions for
best results.
• Place unit at least 7 feet from equipment
best results.
• Place unit at least 7 feet from equipment
that emits electric waves such as
televisions or radios.
televisions or radios.
• Place unit at least 2 feet from the wall.
• Keep sensors away from drafty areas.
• Keep curtains away from sensors, as
• Keep sensors away from drafty areas.
• Keep curtains away from sensors, as
they may interfere with air intake/outlet.
• Place unit on a stable surface with plenty
of air circulation.
1. Remove protective film from the
control panel.
2. Remove the front panel by grasping the
bottom outside edges and gently pulling
toward you.
toward you.
3. Pull out the filter cassette by grasping
the tabs located on each side of the
filter cassette.
filter cassette.
4. Remove the plastic wrap from the
filter cassette.
5. Return the filter cassette into the
main unit.
6. Replace the front panel by hooking the
front panel on the top of the unit. Swing
panel in by pushing gently until the panel
snaps into place.
panel in by pushing gently until the panel
snaps into place.
7. Plug in the power cord to a wall outlet.
8. Press POWER button until short “beep”
is heard.
For the first 4 minutes after turning the
unit on, the dust and odor indicators will
flash while the unit measures air quality.
unit on, the dust and odor indicators will
flash while the unit measures air quality.
6
7