Winix WAC-9000 Manuel D’Utilisation

1.  TIMER - Press the TIMER button once 

for 1 hour of operation; press the button 
a second time for 4 hours; press a third 
time for 8 hours. Pressing the TIMER 
button a fourth time returns to the Off 
Timer mode.

2.  FUNCTION - Press the FUNCTION 

button once to set the unit to Auto. 
Continue to press the button for Sleep 
> Low > Medium > High > Return 
to Auto.  

3.  DUST & ODOR SENSORS - 

Automatically monitor air quality and 
adjust fan speed.

4.  CHANGE FILTER INDICATOR - The 

indicator will signal when to replace the 
filter cassette.

5.  AUTO MODE - The unit is set to 

default to Automatic operation when 
it is first turned on. Smart sensors will 
automatically sense the amount of 
impurities in the air, and adjust the fan 
speed accordingly.

 INDICATOR - Turn 

on the Plasma generator by pressing 
the PLASMA ON/OFF button on the 
remote. PlasmaWave

TM

 generates both 

positive and negative ions to produce 
hydroxyl radicals that inactivate airborn 
contaminants.

7.  LIGHT SENSOR - Automatically 

activates Sleep mode when room 
is darkened.

8.  FAN SPEED INDICATOR - Shows 

current fan speed setting.

9.  SLEEP - The unit will work on Ultra-

Quiet mode and dim the control 
panel lights.

10. AUTO SLEEP MODE - Use the TIMER 

button on the display or remote to 
manually turn the light sensor on or 
off. With the light sensor on, the unit 
will automatically operate in Sleep 
mode when the room is dark. When the 
room is light, the unit will revert to its 
previous settings. Sleep mode provides 
the lowest, quietest fan setting and a 
dimmed display panel. 

11.  TIMER - Indicates timer setting or 

continuous mode.

12. POWER BUTTON - Turn unit on 

and off by pressing the POWER 
button. Holding the button down 
for 2-3 seconds turns the Plasma 
generator on or off.

6

7