Intel 253666-024US Manuel D’Utilisation
3-486 Vol. 2A
INVD—Invalidate Internal Caches
INSTRUCTION SET REFERENCE, A-M
INVD—Invalidate Internal Caches
Description
Invalidates (flushes) the processor’s internal caches and issues a special-function
bus cycle that directs external caches to also flush themselves. Data held in internal
caches is not written back to main memory.
After executing this instruction, the processor does not wait for the external caches
to complete their flushing operation before proceeding with instruction execution. It
is the responsibility of hardware to respond to the cache flush signal.
The INVD instruction is a privileged instruction. When the processor is running in
protected mode, the CPL of a program or procedure must be 0 to execute this
instruction.
Use this instruction with care. Data cached internally and not written back to main
memory will be lost. Unless there is a specific requirement or benefit to flushing
caches without writing back modified cache lines (for example, testing or fault
recovery where cache coherency with main memory is not a concern), software
should use the WBINVD instruction.
This instruction’s operation is the same in non-64-bit modes and 64-bit mode.
bus cycle that directs external caches to also flush themselves. Data held in internal
caches is not written back to main memory.
After executing this instruction, the processor does not wait for the external caches
to complete their flushing operation before proceeding with instruction execution. It
is the responsibility of hardware to respond to the cache flush signal.
The INVD instruction is a privileged instruction. When the processor is running in
protected mode, the CPL of a program or procedure must be 0 to execute this
instruction.
Use this instruction with care. Data cached internally and not written back to main
memory will be lost. Unless there is a specific requirement or benefit to flushing
caches without writing back modified cache lines (for example, testing or fault
recovery where cache coherency with main memory is not a concern), software
should use the WBINVD instruction.
This instruction’s operation is the same in non-64-bit modes and 64-bit mode.
IA-32 Architecture Compatibility
The INVD instruction is implementation dependent; it may be implemented differ-
ently on different families of Intel 64 or IA-32 processors. This instruction is not
supported on IA-32 processors earlier than the Intel486 processor.
ently on different families of Intel 64 or IA-32 processors. This instruction is not
supported on IA-32 processors earlier than the Intel486 processor.
Operation
Flush(InternalCaches);
SignalFlush(ExternalCaches);
Continue (* Continue execution *)
SignalFlush(ExternalCaches);
Continue (* Continue execution *)
Flags Affected
None.
Opcode*
Instruction
64-Bit
Mode
Compat/
Leg Mode
Description
0F 08
INVD
Valid
Valid
Flush internal caches; initiate flushing of
external caches.
NOTES:
* See the IA-32 Architecture Compatibility section below.