Enterasys Networks 1G58x-09 Manuel D’Utilisation
Logging and Network Management Command Set
Configuring Node Aliases
11-67
11.2.5 Configuring Node Aliases
Purpose
To review, configure, disable and re-enable node (port) alias functionality, which
determines what
network protocols are running on one or more ports.
Commands
Commands to configure node aliases are listed below and described in the associated section as
shown.
shown.
•
show nodealias (
)
•
show nodealias config (
)
•
set nodealias (
•
set nodealias maxentries (
)
•
clear nodealias (
•
clear nodealias config (
11.2.5.1 show nodealias
Use this command to display node alias properties on one or more ports.
show nodealias [port-string]
Syntax Description
Command Defaults
If port-string is not specified, node alias properties will be displayed for all ports.
Command Mode
Read-Only.
port-string
(Optional) Displays node alias properties for specific
port(s). For a detailed description of possible port-string
values, refer to
port(s). For a detailed description of possible port-string
values, refer to