Raritan Computer CCA-0N-V5.1-E Manuel D’Utilisation
Chapter 7: Managed Powerstrips
95
Configuring PowerStrips Connected to KX, KX2, KX2-101, KSX2, and P2SC
CC-SG automatically detects PowerStrips connected to KX, KX2,
KX2-101, KSX2, and P2SC devices. You can perform the following tasks
in CC-SG to configure and manage PowerStrips connected to these
devices.
KX2-101, KSX2, and P2SC devices. You can perform the following tasks
in CC-SG to configure and manage PowerStrips connected to these
devices.
Add a PowerStrip Device Connected to a KX, KX2, KX2-101,
KSX2, or P2SC Device
KSX2, or P2SC Device
(on page 95)
Move a KX, KX2, KX2-101, KSX2, or P2SC's PowerStrip to a
Different Port
Different Port
(on page 95)
Delete a PowerStrip Connected to a KX, KX2, KX2-101, KSX2, or
P2SC Device
P2SC Device
(on page 96)
Add a PowerStrip Device Connected to a KX, KX2, KX2-101, KSX2,
or P2SC Device
or P2SC Device
When you add a KX, KX2, KX2-101, KSX2, or P2SC device that is
connected to a PowerStrip to CC-SG, the PowerStrip is added
automatically. The PowerStrip will appear in the Devices tab, beneath
the device to which it is connected.
connected to a PowerStrip to CC-SG, the PowerStrip is added
automatically. The PowerStrip will appear in the Devices tab, beneath
the device to which it is connected.
Next Steps:
1. Configure outlets. See
Configuring Outlets on a PowerStrip
(on
page 99).
2. Associate each outlet with the node that it powers. See
Interfaces
for Managed Powerstrip Connections
(on page 130).
Move a KX, KX2, KX2-101, KSX2, or P2SC's PowerStrip to a
Different Port
Different Port
When you physically move a PowerStrip from one KX, KX2, KX2-101,
KSX2, or P2SC device or port to another KX, KX2, KX2-101, KSX2, or
P2SC device or port, CC-SG automatically detects the PowerStrip and
updates its association to the correct device. You do not have to add the
PowerStrip to CC-SG separately.
KSX2, or P2SC device or port to another KX, KX2, KX2-101, KSX2, or
P2SC device or port, CC-SG automatically detects the PowerStrip and
updates its association to the correct device. You do not have to add the
PowerStrip to CC-SG separately.
Note: When you physically remove a PowerStrip from a P2SC port but
do not connect it to another port, CC-SG does not remove the
PowerStrip from the old port. You must perform a partial or full database
reset of the UMT to which the PowerStrip is connected to remove the
PowerStrip from the Devices tab. See the Raritan P2SC User Guide.
do not connect it to another port, CC-SG does not remove the
PowerStrip from the old port. You must perform a partial or full database
reset of the UMT to which the PowerStrip is connected to remove the
PowerStrip from the Devices tab. See the Raritan P2SC User Guide.