TP-LINK TL-WR740N Manuel D’Utilisation

 

-35- 

¾

 

MAC Address - The physical address of the Router, as seen from the LAN. The value can't 

be changed. 

¾

 

IP Address - Enter the IP address of your Router or reset it in dotted-decimal notation 

(factory default: 192.168.0.1). 

¾

 

Subnet Mask - An address code that determines the size of the network. Normally use 

255.255.255.0 as the subnet mask.   

)

 

1.  If you change the IP Address of LAN, you must use the new IP Address to login the Router.   
2.  If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the 

DHCP server will change accordingly at the same time，while the Virtual Server and DMZ 
Host will not take effect until they are re-configured. 

Choose menu “Network→MAC Clone”, and then you can configure the MAC address of the 

WAN on the screen below, Figure 4-13: 

 

Figure 4-13  MAC Address Clone

 

Some ISPs require that you register the MAC Address of your adapter. Changes are rarely 

needed here. 

¾

 

WAN MAC Address - This field displays the current MAC address of the WAN port. If your 

ISP requires you to register the MAC address, please enter the correct MAC address into 

this field in XX-XX-XX-XX-XX-XX format(X is any hexadecimal digit).   

¾

 

Your PC's MAC Address - This field displays the MAC address of the PC that is managing 

the Router. If the MAC address is required, you can click the Clone MAC Address  To 

button and this MAC address will fill in the WAN MAC Address field. 

Click  Restore Factory MAC to restore the MAC address of WAN port to the factory default 

value. 

Click the Save button to save your settings. 

)

Note:   

Only the PC on your LAN can use the MAC Address Clone function.