ZyXEL Communications 1000 Manuel D’Utilisation
Chapter 7 Tutorials
ZyWALL USG 1000 User’s Guide
166
7.14.2 Configure Device HA on the Master ZyWALL
1
Log into ZyWALL A (the master) and click Configuration > Device HA > Active-
Passive Mode. Double-click ge1’s entry.
Passive Mode. Double-click ge1’s entry.
2
Configure 192.168.1.3 as the Management IP and 255.255.255.0 as the
Manage IP Subnet Mask. Click OK.
Manage IP Subnet Mask. Click OK.
Figure 129 Configuration > Device HA > Active-Passive Mode > Edit: Master
ZyWALL Example
3
Set the Device Role to Master. This example focuses on the connection from the
LAN (ge1) to the Internet through the ge2 interface, so select the ge1 and ge2
interfaces and click Activate. Enter a Synchronization Password
(“mySyncPassword” in this example) and click Apply.
LAN (ge1) to the Internet through the ge2 interface, so select the ge1 and ge2
interfaces and click Activate. Enter a Synchronization Password
(“mySyncPassword” in this example) and click Apply.
Figure 130 Configuration > Device HA > Active-Passive Mode: Master ZyWALL
Example