Cabletron Systems SEHI-22FL Mode D'Emploi

This chapter outlines the procedure for attaching the SEHI to the network 
as a stackable or standalone device. Ensure that the network meets the 
guidelines and requirements outlined in Chapter 3, Installation 
Requirements and Specifications, before installing the SEHI.

Unpack the SEHI as follows:

1. Remove the shipping material covering the SEHI in the shipping box.

2. Carefully remove the SEHI from the shipping box and set it aside to 

prevent damage.

3. Visually inspect the SEHI. If there are any signs of damage, contact 

Cabletron Systems Technical Support immediately.

4. Read the SEHI Release Notes included in the shipping box.

Failure to follow installation instructions may result in an 
electrical shock hazard.

Cabletron Systems includes a 3-1/2" disk with the SEHI that 
contains a backup copy of the SEHI Flash Firmware Image 
File. Download the file to the SEHI if the existing image 
becomes corrupted.

SEHI Book  Page 1  Friday, April 19, 1996  10:46 AM