Generac HTSN400K3 Fascicule
HTS
Automatic Transfer Switch
100 - 400 Amps 600 VAC
• Single coil design, electrically operated and
mechanically held
• Programmable exercise time
• SPDT aux contacts
• Main contacts are silver alloy
• Conformal coating protects the printed circuit board
• UL1008 Listed
• Indicating LED’s for switch position, standby
• SPDT aux contacts
• Main contacts are silver alloy
• Conformal coating protects the printed circuit board
• UL1008 Listed
• Indicating LED’s for switch position, standby
operating, utility available
• 3 position test switch: Fast Test, Auto, Normal Test
• Arc shutes on main contacts
• Signal before transfer contacts
• Rated to all classes of loads
• Remote start, stop and transfer through GenLink
• Arc shutes on main contacts
• Signal before transfer contacts
• Rated to all classes of loads
• Remote start, stop and transfer through GenLink
®
Communications Software
• Up to four transfer switches per generator
• 50/60 hertz operation
• 50/60 hertz operation
STANDARD FEATURES
200 Amp HTS NEMA 1
DESCRIPTION
• The Generac HTS Transfer Switch is a “State
of the Art” Smart Switch designed to operate
in conjunction with the Generac H100 Series
generator controller.
in conjunction with the Generac H100 Series
generator controller.
• The HTS Transfer Switch has a 2 wire RS485
communication link to the generator controller.
• The utility voltage is monitored by the HTS
along with signal before transfer timing, time
delay neutral and inphase transfer.
delay neutral and inphase transfer.
• Switch operation is instigated by the generator
controller.
• All timers and voltage setpoints are
programmable through GenLink
®
Communications Software.
• Time delay neutral and inphase monitor are
included.
• NEMA 12 enclosure (100-400 Amps)
• NEMA 3R enclosure (All)
• NEMA 3R enclosure (All)
• NEMA 4 and 4x enclosure
• 4 pole for separately derived systems
• 4 pole for separately derived systems
OPTIONAL ACCESSORIES