Actron 9640 Manuel D’Utilisation

Tool Setup allows you to change the 

measurement units and LCD contrast, 

turn beeper On/Off and display tool 

information. The settings remain until 

the internal batteries become 

discharged.

To change the measurement units, use 

the 

UP/DOWN arrow keys to select 

English/Metric and press 

ENTER. 

In the Measurement Units menu, 

select English or Metric and then press 

ENTER. English is the default.
Press 

The display contrast can be adjusted 

from the Tool Setup menu. Select 

Display Contrast and press 

ENTER.

Use the 

UP/DOWN arrow keys to 

increase and decrease the contrast. 

Press 

ENTER to save the setting and to 

return to the Setup Tool menu. 

Beeper selection allows the user to turn Off the tool’s beeper. The bell symbol 

~

 will not appear in the lower right hand corner of the display when the beeper 

is off.

This function allows you to view specific 

tool information that may be needed when 

contacting customer service.
Select Tool Information with the 

UP/DOWN arrow keys and press ENTER.
The information shown to the right displays 

on the screen. Use the 

UP/DOWN arrow 

keys to view all the lines. 
Press the 

BACK or ENTER key to return to 

the Setup Tool menu.

✓

Write this information in the space provided on the inside of the front cover. 

The scan tool is designed as a Data Terminal Equipment (DTE) device with a 

DB9M (9-pin D-shape male) connector to interface with a compatible serial 

printer. 

Main Menu

?

` Vehicle Diagnosis

Tool Setup

 [

Tool Self-Tests   ~

Setup Tool
` 1)English/Metric

2)Display Contrast

[

3)Beeper

~

] Increase Contrast
[ Decrease Contrast

Press ENTER To Save ~

Tool Information:
` Serial No:10000085

SW ID: 945BH
HW Ver: 0 
Boot Ver:  0
Prod ID:3
Board ID:  10
Burn Date:03/07/02