Actron 9640 Manuel D’Utilisation

Compatible Printers
The printer must have a serial RS-232 interface circuit and be compatible with 

the Epson FX format. The following printers are recommended:

❒

Seiko DPU-414

❒

Kodak DICONIX 180si (serial printer model)

❒

Lexmark Model 2480 with optional serial interface (p/n 12T0154)

❒

Panasonic KX-P1131 printer

❒

Type: A standard RS-232 type cable.

❒

Scan Tool end: DB9F (female) connector.

❒

Printer end: 

• Use a DB9M (male) connector for the Seiko and 

Kodak printers.

• Use a DB25 male connector for the Lexmark and 

adapter or different RS-232 cable is required. Adapt-

ers are available at most local PC stores or electron-

ics outlets.

❒

Default settings for the scan tool are: 9600 Baud, 8 Data Bits, No Parity 

and 1 Stop Bit.

❒

Ensure the settings on the scan tool and printer match.

❒

For the Lexmark and Panasonic printers, ensure the printer’s interface 

selection is set to either “auto” or “serial”.

The printer and scan tool must have the same communication settings. You can 

change the scan tool’s settings if necessary. 

Select either Print Codes from the Main 

Menu or Print Data from of the 

Function List and press 

ENTER. 

Next, the tool will inform you of the 

printer settings (Custom or Default), 

then ask if you wish to change them. 
Select YES and press 

ENTER.The 

default values are designated on the 

display with the word (Default) next to 

the option. 

Main Menu

?

Vehicle Diagnosis

` Print Codes

[

Tool Setup

Tool Set To Default ? 

Printer Settings.

 Change  Settings?

Yes    <No>