Bunn 41343 Manuel D’Utilisation

Page 31

NOTE: Make sure the water in the tank is touching 

the refill probe.

1.  Press and hold upper right hidden switch until the 

display reads UNITS. Release switch.  Press and 

release upper right hidden switch until the display 

reads REFILL and shows a number on both sides 

of the word.

2.  To adjust the threshold setting, press (-) to de-

crease, or (+) to increase the setting.

NOTE: Always make sure that the number on the right 

is larger than the number on the left when water is in 

contact with the refill probe in the tank.

3.  When finished, press and release DONE. This saves 

the new setting and advances to the next function 

screen:

 

SPRY OZ/M (SINGLE brewers)

L SPRY OZ/M (DUAL brewers). Another alternative 

is to press and release the ON/OFF switch (either on 

DUAL brewers) located on the front switch panel 

to exit REFILL and return to the MAIN SCREEN.

 

This function allows the operator to view or to enter 

the actual flow rate coming out of the sprayhead. This 

is NOT used to change the actual flow rate, but to tell 

the internal controller how fast the water is flowing. 

The unit of measure is ounces per minute (Oz/M).

1.  Press and hold upper right hidden switch until the 

display reads 

UNITS. Release switch.  Press and 

release upper right hidden switch until the display 

reads SET READY.

2.  To adjust the ready temperature, press the (-) 

button to decrease, or (+) to increase the ready 

temperature.

3.  When finished, press and release DONE to save 

the new setting, exit the SET READY function and 

advance to the next function screen, REFILL. 

Another alternative is to press and release either 

ON/OFF switch located on the front switch panel 

to exit the SET READY function and return to the 

  This function allows the operator to adjust the 

sensitivity of the refill circuit. This is mainly a trouble-

shooting feature. Water in different geographical loca-

tions can have different conductivities. By adjusting 

the sensitivity of the refill circuit, this will allow the 

brewer to operate under various water conditions.

XXX REFILL -> XXX

 (-)  DONE  (+)

41343 080108