Cornelius 3 Manuel D’Utilisation
Viper Service Manual
Publication Number: 621360041TBSER
- 28 -
© 2010, IMI Cornelius Inc.
The Maintenance menu is used for barrel maintenance, diagnostics, BRIX setup
and system information. It allows the technician access to the unit during peri-
odic maintenance or troubleshooting problems. It sometimes overrides the nor-
mal inputs from the system in order to perform this task.
and system information. It allows the technician access to the unit during peri-
odic maintenance or troubleshooting problems. It sometimes overrides the nor-
mal inputs from the system in order to perform this task.
Figure 20. Select Screen
Barrel Maintenance
Menu
Menu
The Barrel Maintenance menu, shown in Figure 21, allows the service techni-
cian to clean, rinse and sanitize the system on a barrel by barrel basis. The bar-
rel must be OFF in order to perform the barrel maintenance functions. As a
warning to the technician, the “Do Not Drink” status indicators are illuminated on
the barrels when entering the Barrel Maintenance menu.
The procedure for purging a barrel is shown in Table 21. The procedure for filling a bar-
rel is shown in Table 22. The procedure for running the scraper blade only on a barrel is
shown in Table 23 and the procedure for waking up a barrel is shown in Table 25.
cian to clean, rinse and sanitize the system on a barrel by barrel basis. The bar-
rel must be OFF in order to perform the barrel maintenance functions. As a
warning to the technician, the “Do Not Drink” status indicators are illuminated on
the barrels when entering the Barrel Maintenance menu.
The procedure for purging a barrel is shown in Table 21. The procedure for filling a bar-
rel is shown in Table 22. The procedure for running the scraper blade only on a barrel is
shown in Table 23 and the procedure for waking up a barrel is shown in Table 25.
Figure 21. Barrel Maintenance Screen
Purging a Barrel
SELECT
12:51P
MAR 04
BARREL MAINT
MANUAL DIAG
TOTALS
BRIX SETUP
MOTOR SETUP
SYSTEM
BACK MAIN SETUP
MAINT
GO
BARREL
MAINT
12:51P
MAR 04
#1 PURGE
#2 OFF
BACK PURGE FILL SPIN
Table 21
Step
Action
Procedure
1
Purge a barrel
From the Select menu (Figure 20), open the Barrel
Maintenance menu, shown in Figure 21.
2
Select the barrel
Use the Up and Down arrows to highlight the desired
barrel
3
Select Purge function
Press the PURGE button at the bottom of the display
to select purge for the highlighted barrel