Smeg GCS70XG Manuel D’Utilisation

 

 

  

 Having carried out the above adjustments, reassemble the appliance 

following, backwards, the instructions in paragraph “5.1 Removing the 
hob”. 

 

   

 Replace the components on the burner and slide 

the knobs on the gas tap pins. Light the burner 
and set it at minimum position. Remove the knob 
and turn the regulation screw inside or next to 
the gas tap pin (depending on the model) until 
you get a suitable minimum flame. Replace the 
knob and check burner flame stability: (rapidly 
turning the knob from maximum to minimum 
position, the flame should not go out). 

 

   

 To regulate the minimum for LPG, completely tighten (clockwise) the 

screw inside or next to the gas tap pin (depending on the model). 
The diameters of the by-passes for each burner are given in table “5.2

 

Regulation for LPG”.