Fujifilm s602 Manuel D’Utilisation
Connection
6
77
CONNECTING AT PC CAMERA MODE
1
Set the Mode dial to “SET”.
2
Set the Power switch to “
q
”.
3
Select “PC CAM” in “USB MODE” in the
SET–UP menu (
SET–UP menu (
➡
P.68) and then switch the
camera off.
●
!
It is recommended that you connect the AC Power
Adapter AC-5VH/AC-5VHS (sold separately) (
Adapter AC-5VH/AC-5VHS (sold separately) (
➡
P.74).
Constant power supply will prevent successful date
transfer from only trouble caused by power supply.
transfer from only trouble caused by power supply.
1
Switch your PC on.
2
Connect the special USB cable to the camera
and the computer.
and the computer.
3
Switch the camera on.
●
!
Ensure that you plug each end of the special USB cable into the correct socket and that the plugs are firmly
inserted all the way into the connection sockets.
inserted all the way into the connection sockets.
If you are using a Windows PC, the driver settings are automatically specified when installation
ends. Simply wait a few moments.
ends. Simply wait a few moments.
✽
If your computer does not recognize the camera, refer to the Software Quick Start Guide.
2
AC-5V(optional)
(USB)
socket
socket
(USB)
socket
socket
USB
socket
socket
PC
Camera Operations
PC Operations
h
When the camera and the computer are
exchanging data, the indicator lamp flashes
alternately green and orange.
exchanging data, the indicator lamp flashes
alternately green and orange.
h
The lens is fixed at the wide-angle zoom
setting.
setting.
h
“PC CAMERA” is displayed on the screen.
h
Auto Power Off is disabled when the
camera is connected to a USB port.
camera is connected to a USB port.
●
!
If you select “PC CAM” as the USB setting and then
switch the camera on, the color tones on the LCD
monitor and TV may differ.
switch the camera on, the color tones on the LCD
monitor and TV may differ.
●
!
Do not disconnect the USB cable when the camera is
communicating with the PC. See P.78 for information
on the disconnection procedure.
communicating with the PC. See P.78 for information
on the disconnection procedure.
h
FinePixViewer automatically starts up and the
PictureHello window opens (Windows only).
PictureHello window opens (Windows only).
h
You can use VideoImpression to view live
images.
images.
If the above operations do not occur, you do
not have the required software programs or
drivers installed on your PC. Refer to the
Software Quick Start Guide booklet and
complete the required PC setup procedures.
Then reconnect the camera to your PC.
not have the required software programs or
drivers installed on your PC. Refer to the
Software Quick Start Guide booklet and
complete the required PC setup procedures.
Then reconnect the camera to your PC.
Always use the prescribed procedure when
disconnecting or switching off the camera (
disconnecting or switching off the camera (
➡
P.78).
1
ＳＥＴ−ＵＰ
ＳＥＴ−ＵＰ
ＵＳＢ ＭＯＤＥ
ＵＳＢ ＭＯＤＥ
ＤＡＴＥ／ＴＩＭＥ
ＤＡＴＥ／ＴＩＭＥ
ＲＥＳＥＴ ＡＬＬ
ＲＥＳＥＴ ＡＬＬ
ＲＥＳＥＴ ＡＬＬ
ＥＮＧＬＩＳＨ
ＥＮＧＬＩＳＨ
ＬＡＮＧＵＡＧＥ
ＬＡＮＧＵＡＧＥ
ＰＲＩＭＡＲＹ ＭＥＤＩＡ
ＰＲＩＭＡＲＹ ＭＥＤＩＡ
ＳＯＵＮＤ
ＳＯＵＮＤ
ＬＯＷ
ＬＯＷ
ＰＣ ＣＡＭ
ＰＣ ＣＡＭ
ＳＥＴ
ＳＥＴ
ＯＫ
ＯＫ
ＯＫ
0
3
0
1
0
2
✽
Screen for Macintosh
✽
Screen for Windows 98 SE