GE ZGU3650 Guide De Spécification
For answers to your Monogram,
®
GE Profile Performance Series,
™
GE Profile
™
or GE appliance questions, call
GE Answer Center
®
service, 800.626.2000.
Monogram.
™
Specification Created 7/00
4-5/8" Min.
Cutout to Vertical
Combustible Surface
Cutout to Vertical
Combustible Surface
8-13/16" Min.
to Side Wall
to Side Wall
8-13/16"
Min.
Cutout
To Side
Wall
Min.
Cutout
To Side
Wall
34-1/2"
2-1/4"
Min. From
Front of
Countertop
Min. From
Front of
Countertop
18-1/8"
Cutout Information
Measure carefully when cutting countertop.
Make sure sides of opening are parallel and rear
and front cuts are exactly perpendicular to sides.
Make sure sides of opening are parallel and rear
and front cuts are exactly perpendicular to sides.
• The Monogram gas cooktop is designed to fit in
a 36” or larger base cabinet.
• The countertop cutout for cooktop must be:
–34-1/2” wide
–18-1/8” deep
–Allow at least 4-5/8” clearance between back
–18-1/8” deep
–Allow at least 4-5/8” clearance between back
of cutout and wall.
–Allow at least 8-13/16” clearance from right
and left side of cutout to adjacent wall.
–Allow at least 2-1/4” clearance between front
of cutout and front edge of countertop.
• Cooktop requires 3” free space below countertop
• If installing cooktop above a cabinet with drawers,
• If installing cooktop above a cabinet with drawers,
is may be necessary to use a shorted length
drawer to allow clearance for gas connection.
drawer to allow clearance for gas connection.
• In some cases, two 3/8” I.D. 45° elbows and a
pipe nipple may be added between regulator and
cooktop to move regulator further back in order to
avoid interference with drawer.
cooktop to move regulator further back in order to
avoid interference with drawer.
ZGU3650—GE Monogram 36” Updraft Cooktop with 5 Burners
Cautioin:
Wallcoverings, countertops and cabinets should
withstand 200°F heat generated by the cooktop.
Wallcoverings, countertops and cabinets should
withstand 200°F heat generated by the cooktop.