Output Solutions ez-1000plus Mode D'Emploi

 
This equipment has been tested and found to comply with the limits for a CLASS A digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference when the equipment is operated in a commercial 
environment. This equipment generates, uses, and can radiate radio frequency energy and, if 
not installed and used in accordance with the instructions, may cause harmful interference to 
radio communications. Operation of this equipment in a residential area is likely to cause harmful 
interference in which case the user will be required to correct the interference at own expense. 

 
This equipment has been tested and passed with the requirements relating to electromagnetic 
compatibility based on the standards EN 55022:1998+A1:2000+A2:2003, CISPR 22 , Class A   
EN 55024:1998+A1:2001+A2:2003, IEC 61000- 4 Series EN 61000-3-2 / 2000 & EN 61000-3-3 / 
1995. The equipment also tested and passed in accordance with the European Standard 
EN55022 for the both Radiated and Conducted emissions limits. 

 
EN55022 : 1998,CLSPR 22, Class A / EN55024 : 1998IEC 61000-4 Serial / EN61000-3-2 : 2000 
/ EN 6100-3-3 : 1995 / CFR 47, Part 15/CISPR 22 3rd Edition : 1997, Class A / ANSI C63.4 : 
2001 / CNS 13438 / IEC60950-1 : 2001 / GB4943 : 2001 / GB9254 : 1998 / GB17625.1 : 2003 
/EN60950-1 : 2001 

CAUTION 
Danger of explosion if battery is incorrectly replaced 
Replace only with the equivalent type recommended by the manufacture. 
Dispose of used batteries according to the manufacturer’s instructions. 

Specifications are subject to change without notice. 

EZ-1000 Plus User’s Manual Rev. B 
 

1