Raritan P2-UMT832M Mode D'Emploi

C

HAPTER 

2:

 

I

NSTALLATION

 

9 

 

 

 

Several administrative functions can be performed on the Function Selection Screen on the 
Paragon II unit’s front panel. 

 

Display Ver./SN 

Test User UST1  

Test Chan. UKVM 

Test Stack Unit 

Stacking Support 

Set LCD Contrast 

Re-Configure  

Set IP Address 

Reset Unit 

Press the FUNC button on the front panel of the Paragon II unit to enter Function Selection mode 
and use the Ç and È buttons to scroll through the Function List. Press the ENT button on the 
front panel to select displayed function and use the instructions below for each specified function. 
Press the ESC button on the front panel at any time to return to Normal Display. 

 

Function Menu 

Display Ver./SN 

 

1.  Display Ver./SN (Firmware Version and Serial Number): Displays current version of 

firmware, the firmware loader, the unit’s serial number, and the field programmable gate 
array (FPGA). 

 

Firmware:  2C1 

SN: CPB80347 

 

2.  Test User UST1 (User Station): Used by administrator to check if user stations (UST1s) are 

functioning properly. Press the Ç or È button to change user port number. Display will read 
“OK”, “None”, or “Failed. Press ESC to return to normal display.”   
If a “failed” condition is detected, make sure Category 5e UTP cable is installed properly and 
secured, or try using another UST1 to see if UST1 under test has become defective. 

 

Test User   UST1 

UST1:  3   OK