Haier dwe-3120a Manuel D’Utilisation

Please  install and adjust the machine according to the requirement of  the manual. 
It  is very  important  to your security  and  correct operating  the machine.

Installation and adjustment

    After opening the package, please take out the
lint filter  from the document bag and install it
into the Filter frame of the inner tub. See to the right  Figure.

Lint filter

Filter frame

The largest allowed slope of the shank base of the machine is 2

. The slanting or rough ground will result in

 unstable running or stoppage of the machine. Please adjust it with following methods:

Confirm it's horizontal 

Hang the plumb  to confirm it's 

horizontal

Adjust the adjustable foot

(1)  To twist the adjustable foot at the right front of
       the cabinet (front the sight of front), please first 
       lift up the side of the foot slightly, loosen the 
       adjustable nut, and twist the foot.

(2)   Fasten the nut after adjustment.

Loosen

Fasten

High

Low

adjustable nut

adjustable foot

Confirm it's horizontal:

If the bulb of the level meter at the balance display
position is inside the standard circle, it indicates that
the machine is horizontal. Otherwise you need to
a d j u s t  t h e  a d j u s t a b l e  l e g  o f  t h e  m a c h i n e .

Air bubble

Standard circle

Suitable

Not suitable